Shower door hinges: a comprehensive guide to buy the right one

Table of Contents

Shower doors are a great way to add style and functionality to any bathroom while also preventing water from splashing everywhere.

While they aren’t that hard to install, there can be some challenges in making sure your hinges are strong enough to hold the door up every time you open it.

Here is a small guide on how you can pick the right shower door hinges for your home.

There are many things to consider when replacing your shower door hinges, including what style of hinge you want, how much clearance you have between the wall and the shower itself, and how much weight the doors need to support.

Picking the right hinges is an important step in creating a safe and beautiful shower environment.

glass to glass hinge

What is a shower door hinge?

Shower doors are supported by hinges, which allow the doors to open and close, and sometimes a locking system is also incorporated into the hinges to secure the doors tightly.

A hinge can be any device for connecting two components.

Technically, shower doors are doors that open inwards, but “shower door hinge” is a common term used to describe the mechanism that supports the door.

A hinge is a device used to connect two objects or parts with the help of a pivot or axle. There are different types of hinges and they are all used to connect different objects, including doors and windows.

There are 2 main types of shower door hinges: Reinforced hinge and mounting brackets.

Reinforced hinged and mounting brackets

This is one of the major types of shower door hinges. It is used to connect the door and the wall together.

It is made with a fabric-covered steel hinge rod, which is connected to the wall and door with a pivot pin. This type of hinge is preferred for mounting heavy and double doors.

Types of Shower Door Hinges

– Pivot hinges – These are the most common types of hinges used for shower doors. They are usually mounted on the wall and are used for doors weighing less than 100 pounds. Pivot hinges can be opened manually by lifting them up.

– End hinges – These are mainly used for shower doors that need to open towards the inside of the shower. The door closes towards the outside, and the hinge is mounted on the outside wall.

– Latching hinges – These are the most secure types of hinges because the loaded doors are latched together, which means they are joined together with a latch. They are used for heavy doors or double doors, or in places where there is a risk of theft, such as locker rooms.


How to decide which type of hinge you need?

There are certain factors that you need to keep in mind while selecting the right hinge type for your shower door.

– Weight – The first thing to consider is the weight of the doors. If they are made of glass, they will be less than 100 pounds and you’ll need pivot hinges. If they are made of wood, they are heavy and you’ll need end hinges.

– Clearance – The next thing to consider is the clearance between the wall and the doors. If there isn’t enough clearance, you can use a mounting bracket to attach the hinge to the wall.

– Space – Lastly, you need to consider the space where the hinges will be mounted. For example, if the doors open towards the inside of the shower and you need to mount the hinge on the outside wall, make sure there is enough space to fit the hinge.

Standard Glass To Wall Or Square Post Spring Hinge-Black

Stainless steel hinges

Stainless steel hinges are the strongest and most durable type of hinges. They are corrosion-resistant, so they will not rust no matter how wet they get. They can be used with both wood and metal doors, they are easy to install, and they are comparable in price with other hinge types. There are two types of stainless steel hinges – standard and marine grade. Standard hinges are suitable for residential use, whereas marine-grade hinges are suitable for commercial use, especially in salt-water-impacted areas.

180 Degree Glass to Glass Shower Hinge

How to Choose Shower Door Hinges

Not all hinges are created equally.

When selecting glass door hinges for a shower door, there are several things to consider.

The type of glass, the weight of the door, the location of the door, and the design of the shower are just a few factors that will impact your buying decision.

For example, tempered glass is standard for shower doors. It’s commonly used in home and business windows and can withstand high impact.

Tempered glass has a safety coating that makes it difficult to break.

However, tempered glass is not recommended for shower doors because the coating makes it difficult to clean. You will also want to take into account the weight of the door.

The hinges must be sturdy enough to support the door and its contents.

It’s recommended that you use a hinge that is 10% stronger than the door’s weight.

Standard Glass To Wall Or Square Post Spring Hinge-Mirror

How to Measure for New Hinges

If you’re buying new glass door hinges, you’ll want to measure your door to ensure the hinges fit properly.

Here are a few things to keep in mind as you measure for new hinges.

First, you’ll want to measure the width and length of your door.

Once you know how big your door is, you can measure the distance between the hinges.

This will help you determine how many hinges you need. If you want the door to open both ways, you will want two hinges.

If you only want the door to open in one direction, you can get by with one. You’ll also want to measure the distance from the top and bottom of the door to the center of the hinge.

This will help you determine the proper height of your new hinges. You don’t want the new hinges to be too high or too low.

0 Degree Glass Shower Hinge

Installing Shower Door Hinges

Installing hinges is a fairly straightforward process.

Before you install your new hinges, you’ll want to clean the door and apply a sealant.

This will protect the door and ensure the hinges stay in place.

Next, you’ll want to apply the hinges to the door.

Make sure you put the hinges on the correct side of the door.

You should also make sure you open the hinge facing the same way it was on the original door.

After you’ve installed the hinges, you may want to use some sandpaper to make sure there are no rough edges that could snag your clothing.

Now you’re ready to install your new glass door hinges! There are many things to consider when buying glass door hinges.

The type of hinge you need will depend on the project and the weight of the door.

You’ll also want to measure your door to make sure the hinges fit properly.

Installing your new hinges is the last step before you can enjoy your new glass door!

135 Degree Glass to Glass Shower Hinge

Inox Star Hardware Glass Shower Door Hinges

There are three common types of door hinges in the home: glass-to-glass, glass-to-wall, and 360-degree pivot hinges.

In the bathroom, the shower door hinge is especially important because of its corrosion resistance and durability.

Inox Star Hardware is a reliable shower door hinge supplier that provides glass-to-glass, glass-to-wall, and 360-degree pivot hinges.

Customers may choose the most suitable shower door hinge for their needs.

The shower door hinges produced by Inox Star Hardware are made of solid brass plates and therefore have excellent strength.

In addition, we use specialized oil and specialized springs to ensure a good user experience. Furthermore, we can produce shower door hinges in different colors according to customer demands.


Shower doors add style and functionality to any bathroom, but they can be tricky to install.

When picking the right shower door hinges for your home, you’ll need to consider things like weight, clearance, and space.

Stainless steel hinges are the strongest type of hinge and are suitable for both residential and commercial use.

Leave a Reply

Your email address will not be published. Required fields are marked *

Get A Quote For Your Project

glass hardwares

Get A Quote For Your Project

Please feel free to fill out the form below and we will contact you shortly.